DJI Ronin MX

van DJI | Artikelcode: DJIRONINMX | Artnr. fabrikant: CP.ZM.000380

Belangrijkste kenmerken


  • 5 minute set-up
  • SmoothTrack movement smoothing
  • Stability in high G-force environments

Acties & cashbacks

  • Geen verzend- of betaalkosten*

    Lieferung innerhalb Deutschlands und ins EU-Ausland versandkostenfrei.

    Auf welchem Wege Sie Ihre Bestellung erreicht, hängt vom Produkt ab. In der Regel versenden wir allerdings mit DHL.

    Keine Kosten für Zahlungmethoden wie Kreditkarte oder ähnliches.

Ronin-MX gimbal system by DJI

  • Compatible with DJI M600
  • Supports RED EPIC, ARRI ALEXA Mini and more cameras
  • Designed for stability in high G-force environments
  • 5 minute set-up
  • Professional 3-axis handheld stabilization
  • 3 modes of operation: Upright, Underslung, Briefcase
  • Auto Tune Stability (ATS) for rapid balancing
  • SmoothTrack™ movement smoothing
     



Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set mics picking up motor noise.
 

POWERFUL AND ACCURATE

Designed to resist high G-forces using powerful motors and IMUs, the Ronin-MX is engineered to maintain stability and hold horizon when mounted to an aircraft or a vehicle. When mounted to the M600 aerial system, it communicates directly with DJI’s flight controller and when attached to vehicles, it connects to an optional GPS module allowing it to stabilize actively for a smoother shot.
 

FREEDOM TO MOVE

A slip ring allows the Ronin-MX to rotate 360° continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt axis range from 90° straight down and beyond to 135°. Popular features of the Ronin series such as the three modes of operation and SmoothTrack™ are also present, giving film makers a range of creative angles and movements.
 

WIRELESS CONTROL AND TRANSMISSION

The Ronin-MX is compatible with Lightbridge 2, providing long-range HD video transmission from the air to the ground from up to 3.1miles (5km) away. If combined with the optional DJI Focus and Focus Expansion Module, focus or aperture can also be pulled remotely with a twist of the wrist. An optional Remote Start/Stop add-on provides the ability to control shooting on a range of airborne cameras.
 

COMPREHENSIVE APP CONTROL

Using DJI Assistant and the dedicated Assistant app for iOS and Android allows complete customization of the Ronin-MX and its behavior. If connected to Lightbridge 2, the DJI GO app can be used to control how the M600 flies including Intelligent Flight Modes, remote control modes, move the gimbal and see an HD live feed from the camera.
 

General

Built-In Functions    


Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Aerial Mode
-Jib or Wirecam Mode
Built-in, independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported
 

Peripheral


Camera Tray Dimensions
Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of camera base plate: 195mm
Maximum width: 160mm

Accessory Power Connections    12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1

GCU Input Power    4S Ronin-M Battery

Connections    2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0

PC Assistant Software Requirements    Windows XP or above; Mac OS X 10.9 or above

Mobile Assistant Software Requirements    iOS 7.1 or above; Android 4.3 or above

 

Mechanical & Electrical Characteristics

Working Current    Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)

Operating Temperature    5° F ~ 120° F (-15° C ~ 50° C)

Weight    
Including handle bar: 6.11 lb (2.77 kg)
Including vibration absorber: 4.74 lb (2.15 kg)

Gimbal Dimensions    
Excluding handle bar :
280 mm (W) x 370 mm (D)x 340 mm (H)
Including handle bar :
560 mm (W) x 370 mm (D) x 440 mm (H)

Working Performance

Load Weight (Reference Value)    10 lb (4.5 kg)

Angular Vibration Range    ± 0.02°

Maximum Controlled Rotation Speed    
Pan axis: 200°/s
Tilt axis: 100°/s
Roll axis: 30°/s

Mechanical Endpoint Range    
Pan axis control: 360°
Tilt axis control: +270° to -150°
Roll axis control: ± 110°

Controlled Rotation Range    
Pan axis control: 360°
Tilt axis control: +45° to -135°
Roll axis control: ± 25°

 

Passende accessoires voor dit product

Bespaar geld dankzij de smarte Calumet Bundles

0 van 5 sterren

0 Beoordelingen

null% van alle klanten bevelen dit product aan!

* We leveren iedere online bestelling binnen Nederland en België gratis bij een minimale bestelwaarde van € 20,-.

Voor bestellingen onder € 20,- worden binnen Nederland en België € 4,95 verzendkosten aangerekend.

Hoe uw bestelling wordt verzonden, hangt van het product af. Zendingen binnen Nederland en België worden in de regel met UPS verzonden.

Bovendien berekenen we geen extra betaalkosten, welke betaalmethode je ook kiest.

Dit product tweedehands kopen

Bedankt